Printing

When a double-sided database is open, the section of both printing dialogs labeled Side Selection will be available.  The section appears like this:

By selecting the appropriate button either the front, back or both can be sent to the printer.

When Both is selected, the Page Display in the Printer Set Up dialog changes to show the layout of both the front and back of the badge.  Depending upon the aspect ratio of the printed page, the front will either be at the top or to the left.  Here is an example:

The Mirror Back Page Layout check box controls how the badges are laid out on the back page.  When unchecked the back page is laid out like the front, as in the above example.  When checked, the back page layout is reversed.

This feature is useful when printing the back on the same piece of paper as the front.  Without it, the back of badge 1 would not come out opposite the front of badge 1.  The Page Display when printing multiple badges with this item checked appears like this:

Note that this does not reverse the actual badge itself, just the way they are laid out on the page.

You can also mirror the back layout when printing the back only.