Modifying An Existing Badge

If the currently displayed badge is not the one to be changed, use the Fast Find or Search commands to select the desired badge.  To modify data in an existing badge the tool bar Modify Badge Data Button is used.  To see this in operation try the following steps:

1.  Click on the tool bar Modify data  button

2.  A dialog showing the current data appears and you can modify the information as you wish.  You can replace data by highlighting the field and starting to type.  To edit existing data, press the ENTER key and edit as required  You can move between the fields using the mouse or the TAB or ENTER keys.  If you have checked the Auto Fill In menu item under Edit, then the fields will contain the data for the current badge.  You can then change any which do not apply to the new badge.  Or you can click on the Clear button to remove all entries, and the Reset to restore them to their original values

3.  Click on OK when you are satisfied with the changes