The ID badge software is designed to run on an IBM® Personal Computer or compatible having the following minimum specifications:
· CPU: Pentium class or better
· CLOCK SPEED: 133MHz or better
· MEMORY (RAM): 16Mb or more
· HARD DISK SPACE: the ID badge software program requires approximately 4Mb, each badge stored requires approximately 130Kb when photographs are uncompressed, or 10-20Kb when JPEG compression is used.
· GRAPHICS CARD: VGA with driver capable of at least 256 colors
· MOUSE: with at least 2 buttons
· SERIAL PORT: an additional port is required if a Tru-Flash imaging system, TWAIN camera or signature capture device is to be used. Check for adequate system resources carefully if more than one of these options is going to be used together.
· PRINTER PORT: at least 1 for security block, 2 strongly recommended unless USB security block is used
· USB PORT: for alternative USB security block